Bartlett Audio Bass Mic
Omnidirectional Condenser Microphone
The Bartlett Audio Bass Mic is a clip-on miniature condenser intended to provide a full and mellow low end for upright bassists while allowing freedom of movement in a performance setting.
This omnidirectional microphone is held inside the f-hole with a small foam pad, and connected to a rugged XLR connector via a permanent 8-foot cable.
According to the manufacturer, the lower frequencies have been tailored to compensate for the inherent “boominess” of a mic placed near the f-hole of the instrument.
The Bartlett Bass Mic can be plugged into an instrument amplifier or a mixer. It requires phantom power.
Permalink: Bartlett Audio Bass-Mic
Specifications
Pickup Patterns | Pads & Filters |
---|---|
Omnidirectional
(26.6 mV/Pa; 40-10,000 Hz) |
|
Capsule Dimensions | Impedance | SPL/Noise |
---|---|---|
Diameter n/a |
200 Ohms (Low) | Max SPL: 134 dB |
Weight | Length | Max Diameter | Interface(s) |
---|---|---|---|
79g (2.79oz) | 13mm (0.51'') | 8mm (0.31'') |
|
Power Specifications |
---|
|
Did we get anything wrong on this page? Please let us know!