Pricing & Availability
- MSRP: $700
Tags
ST66 Tube Documentation
Sterling Audio ST66 Tube
Cardioid Tube Condenser Microphone
The ST66 is a side-address vacuum tube condenser based on the Groove-Tubes GT66.
The mic has fixed-cardioid polar pattern, switchable 75Hz low rolloff, and switchable -10dB pad. A low noise, low heat Groove Tubes 6205 sub-miniature tube is used.
The mic has very high sensitivity, at 35mV/Pa. This is a characteristic of most Groove Tubes and Sterling mics.
The one-inch brass capsule features 3-micron gold-evaporated Mylar diaphragm and unique Disk Resonator for improved high-frequency response. As with all Groove Tubes and Sterling large-condenser capsules, it is “oven baked” to remove residual moisture, helping ensure consistent performance.
The mic ships with: a zippered storage pouch, the SM4 shockmount, a 7-pin XLR cable, and the mic’s power supply (p/n STPSM1).
The Sterling Audio ST66 Tube is also known as: ST-66.
Specifications
| Pickup Patterns | Pads & Filters |
|---|---|
|
Cardioid
(25 mV/Pa; 20 - 20,000 Hz) |
|
| Capsule Dimensions | Impedance | SPL/Noise |
|---|---|---|
| Diaphragm diameter: 25mm Capsule diameter: 32mm Diaphragm gauge: 3 microns |
200 Ohms (Low) | Max SPL: 140 dB Self-noise: 23.0 dB(A) |
| Weight | Length | Max Diameter | Interface(s) |
|---|---|---|---|
| 544g (19.19oz) | 190mm (7.48'') | 46mm (1.81'') |
|
| Power Specifications |
|---|
|
Did we get anything wrong on this page? Please let us know!
