SE Electronics X1T
Cardioid Tube Condenser Microphone
The X1 T is a large-diaphragm Cardioid condenser microphone built into the case of the X1 fet condenser. It uses a tube circuit, no details of which have been published.
The capsule is the same as is found in the X1: a 32mm O.D. K67 derivative.
Two switches on the mic body independently enable a -10dB pad and a high-pass filter (described by musicradar.com as filtering frequencies below 80Hz).
The mic ships with its 7-pin cable, power supply and cord, and a hard mount.
The SE Electronics X1T is also known as: X1-T.
The mic was released in 2014.
Specifications
Pickup Patterns | Pads & Filters |
---|---|
Cardioid
(n/a mV/Pa; n/a) |
|
Capsule Dimensions | Impedance | SPL/Noise |
---|---|---|
Capsule diameter: 32mm |
n/a |
Weight | Length | Max Diameter | Interface(s) |
---|---|---|---|
n/a | 170mm (6.69'') | n/a |
|
Power Specifications |
---|
|
Did we get anything wrong on this page? Please let us know!