recordinghacks

Search Microphones


Share This Page

Related Microphones

CAD Audio M37

Pricing & Availability

  • MSRP: $159
  • Discontinued

Tags

Reviews & News

M37 Documentation

CardioidCAD Audio M37

Cardioid Condenser Microphone

The CAD M37 is a fixed Cardioid condenser, with a large-diaphragm capsule and excellent performance specifications. It was an early mic in CAD’s “Global Audio” line, dating to 2002. Despite the line’s nomenclature, the M37 was described as being “assembled and tested” in the US.

Along with the multipattern M39, the M37 was created by CAD as a low-cost product to be distributed and sold by Guitar Center. CAD’s original intent for this product was to sell it not as a CAD product, but under the “Global Audio” brand name. However, the line was not a commercial success, and was dropped in favor of the CAD M177/M179.

M37The mic’s circuitry is believed to be the same as the CAD M177 — itself a fixed-Cardioid version of the M179. These mics use CAD’s “Equitek” op-amp circuitry, which is characterized by high current draw (8mA) and very low self-noise. The M37 is rated at 11 dBA self-noise, an excellent figure for an inexpensive microphone, especially by 2002 standards.

The capsule, according to CAD, was a single-sided version of the Chinese-made capsule from the Equitek E-300. This differentiated it from the M177, which we believe was originally sold with a US-made Optema capsule before the entire mic was outsourced to Asian factories.

Two switches on the body enabled a high-pass filter and a -20dB (non-capacitative) pad. These features, and in fact the body design, were inherited from the M177 and M179.

M37The M37 shipped with a ring mount in a compact foam-lined aluminum briefcase. The foam cutout provided room to leave the mount attached.

All M37 Photos by Scott Gentle

Permalink: CAD Audio M37

The mic was released in 2002.

Specifications

Pickup Patterns Pads & Filters
Cardioid (15.9 mV/Pa; 20 - 20,000 Hz)
Capsule Dimensions Impedance SPL/Noise
Diameter n/a
Diaphragm gauge: 3 microns
200 Ohms (Low) Max SPL: 143 dB
Self-noise: 11.0 dB(A)
Weight Length Max Diameter Interface(s)
425g (14.99oz) 165mm (6.50'') n/a
  • 3-pin XLR male (1)
Power Specifications
  • Requires phantom power
  • Phantom voltage: 24–52v

Did we get anything wrong on this page? Please let us know!