recordinghacks

Audio-Technica AT825

X/Y Stereo Condenser Stereo Microphone

The AT825 is a stereo FET condenser microphone designed primarily for field use — DAT, camera mount, etc.

The mic has two miniature electret condenser capsules mounted at 110° for XY-stereo recording.

The mic has a 5-pin XLRM jack, and ships with a 5m Y-cable (XLR5F to two XLR3M).

It can be powered via phantom power (5–52V) or via a single AA battery.

Includes AT8405a stand clamp for 5/8''-27 threaded stands; battery; AT8120 windscreen; soft protective pouch.

Electronic Musician, 2003

The AT825 was a consistently good performer, typically producing a well-balanced and seemingly preequalized sound. The mic tends to highlight certain defining frequencies in the lows, high mids, and highs while downplaying typically troublesome low mids.

Permalink: Audio-Technica AT825

Specifications

Frequency Response - X/Y StereoClick Graph to Compare!

Pickup Patterns	Pads & Filters
X/Y Stereo (4.4 mV/Pa; 30 - 20,000 Hz)	Filter: HPF (Via Switch)

Capsule Dimensions	Impedance	SPL/Noise
Diameter n/a	200 Ohms (Low)	Max SPL: 126 dB

Weight	Length	Max Diameter	Interface(s)
240g (8.47oz)	214mm (8.43'')	62mm (2.44'')	5-pin XLR male (1)

Power Specifications
Requires phantom power Has battery compartment (1.5V AA/UM3) Phantom voltage: 5-52v

Did we get anything wrong on this page? Please let us know!